Stormwater Systems

RECHARGER® 330XLHD, MODEL #330XLHD

The Recharger® 330XLHD is a 30.5″ (775 mm) tall, high capacity plastic stormwater management chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 330XLHD has the side portal internal manifold feature. HVLV™ FC-24 Feed Connectors are inserted into the side portals to create the internal manifold.

show more

Available models:

  • Recharger 330XLRHD Heavy Duty Stand Alone Unit
  • Recharger 330XLSHD Heavy Duty Starter Unit
  • Recharger 330XLIHD Heavy Duty Intermediate Unit
  • Recharger 330XLEHD Heavy Duty End Unit

Complete your preliminary calculations using our Stormwater Design Calculator.

show less

Length

8.50 ft2.59 m

Width

52 in1321 mm

Height

30.50 in775 mm

Installed Length

7.00 ft2.13 m

Length Adjustment per Run

1.50 ft0.46 m

Chamber StorageThese values are based on the installed length of the chamber. See specifications for installed length.

7.459 ft³/ft52.21 ft³/unit391 gal0.69 m³/m1.48 m³/unit1478.44 L

Min. Installed StorageThese values are based on the installed length of the chamber. See specifications for installed length.

11.32 ft³/ft79.26 ft³/unit593 gal1.05 m³/m2.24 m³/unit2244.25 L

Min. Area Required per UnitThis is the area of the installed length of the chamber multiplied by the center-to-center spacing.

33.83 ft²3.14 m²

Min. Center-to-Center Spacing (Design Unit Width)

4.83 ft1.47 m

Max. Allowable Cover

3.66 m12 ft

Max. Inlet Opening in End Wall

24 in600 mm

Max. Allowable O.D. in Side PortalO.D. = outside dimension of pipe

11.75 in298 mm

Compatible Feed Connector

HVLV FC-24 Feed Connector

Request Information