36 in / 914 mm
MODEL # 360HD
The Recharger® 360HD is a 36″ (914 mm) tall, high capacity chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 360HD has the side portal internal manifold feature. HVLV® FC-48 Feed Connectors are inserted into the side portals to create the internal manifold.
Contractors are able to hand place the units on-site, unlike larger, more cumbersome competitive products.
Meets ASTM F3430, F2418 and F2787 standards.
Value engineered design for maximum cost savings.
Adheres to AASHTO LRFD Design Standards.
55% more storage per foot over the leading 30″ high competitor chamber.
8.6% more storage per foot over 42″ HDPE pipe.
4.17 ft1.27 m
60 in1525 mm
36 in914 mm
3.67 ft1.12 m
|Length Adjustment per Row – with two end caps installed||
2.50 ft0.76 m
|Length Adjustment per Row – when not using end caps||
.50 ft0.15 m
|Chamber StorageThese values are based on the installed length of the chamber. See specifications for installed length.||
10.00 ft³/ft36.66 ft³/unit.929 m³/m1.038 m³/unit
|Min. Installed StorageThese values are based on the installed length of the chamber. See specifications for installed length.||
15.199 ft³/ft55.73 ft³/unit1.412 m³/m1.58 m³/unit
|Min. Area RequiredThis is the area of the installed length of the chamber multiplied by the center-to-center spacing.||
21.08 ft²1.96 m²
|Min. Center-to-Center Spacing||
5.75 ft1.75 m
|Max. Allowable Cover||
3.66 m12 ft
|Max. Allowable O.D. in Side PortalO.D. = outside dimension of pipe||
11.5 in292 mm
|Compatible Feed Connector|
|Compatible End Cap|