Stormwater Systems
RECHARGER® 330XLHD
30.5 in / 775 mm
MODEL # 330XLHD
The Recharger® 330XLHD is a 30.5″ (775 mm) tall, high capacity plastic stormwater management chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 330XLHD has the side portal internal manifold feature. HVLV™ FC-24 Feed Connectors are inserted into the side portals to create the internal manifold.
show more
Available models:
- Recharger 330XLRHD Heavy Duty Stand Alone Unit
- Recharger 330XLSHD Heavy Duty Starter Unit
- Recharger 330XLIHD Heavy Duty Intermediate Unit
- Recharger 330XLEHD Heavy Duty End Unit
Complete your preliminary calculations using our Stormwater Design Calculator.
show less
Length |
8.50 ft2.59 m |
Width |
52 in1321 mm |
Height |
30.50 in775 mm |
Installed Length |
7.00 ft2.13 m |
Length Adjustment per Run |
1.50 ft0.46 m |
Chamber StorageThese values are based on the installed length of the chamber. See specifications for installed length. |
7.459 ft³/ft52.21 ft³/unit391 gal0.69 m³/m1.48 m³/unit1478.44 L |
Min. Installed StorageThese values are based on the installed length of the chamber. See specifications for installed length. |
11.32 ft³/ft79.26 ft³/unit593 gal1.05 m³/m2.24 m³/unit2244.25 L |
Min. Area Required per UnitThis is the area of the installed length of the chamber multiplied by the center-to-center spacing. |
33.83 ft²3.14 m² |
Min. Center-to-Center Spacing (Design Unit Width) |
4.83 ft1.47 m |
Max. Allowable Cover |
3.66 m12 ft |
Max. Inlet Opening in End Wall |
24 in600 mm |
Max. Allowable O.D. in Side PortalO.D. = outside dimension of pipe |
11.75 in298 mm |
Compatible Feed Connector |