Stormwater Systems

RECHARGER® 300HD

30 in / 762 mm
MODEL # 300HD

The Recharger® 300HD is a 30″ (762 mm) tall, high capacity plastic stormwater management chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 300HD has the side portal internal manifold feature. HVLV™ FC-24 Feed Connectors are inserted into the side portals to create the internal manifold.

show more

Available models:

  • Recharger 300HD Heavy Duty Chamber
  • Recharger 300HD End Cap

CULTEC StormGenie Design Tool

Design your stormwater project using our StormGenie Design Tool.
Generate accurate, project-specific CAD drawings and reports.

show less

Length

7.54 ft2.29 m

Width

51 in1295 mm

Height

30 in762 mm

Installed Length

7.08 ft2.16 m

Length Adjustment per Run

0.46 ft0.14 m

Chamber StorageThese values are based on the installed length of the chamber. See specifications for installed length.

6.53 ft³/ft46.27 ft³/unit346 gal0.61 m³/m1.31 m³/unit1310 L

Min. Installed StorageThese values are based on the installed length of the chamber. See specifications for installed length.

10.51 ft³/ft74.44 ft³/unit566 gal0.98 m³/m2.11 m³/unit2143 L

Min. Area Required per UnitThis is the area of the installed length of the chamber multiplied by the center-to-center spacing.

33.63 ft²3.12 m²

Min. Center-to-Center Spacing (Design Unit Width)

4.75 ft1.45 m

Max. Allowable Cover

3.66 m12 ft

Max. Inlet Opening in End Wall

24 in600 mm

Max. Allowable O.D. in Side PortalO.D. = outside dimension of pipe

10 inch HDPE, 12 inch PVC250 mm HDPE, 300 mm PVC

Compatible Feed Connector

HVLV FC-24 Feed Connector