Septic Systems Archives - CULTEC, Inc.

CAD – Contactor Field Drain Three View – Septic
PDF – Contactor Field Drain C-4 Submittal Package – Septic
PDF – Contactor Field Drain C-4 Three View – Septic

***DISCONTINUED***
Alternate products:
Contactor 100
Contactor 100HD

Length	8.50 ft2.59 m
Installed Length	8.00 ft2.44 m
Length Adjustment per Run	0.50 ft0.15 m
Width	48 in1219 mm
Height	8.50 in216 mm
Invert Height	3 in76 mm

Downloads

Product Tags

CONTACTOR® FIELD DRAIN, Septic Systems

The post CONTACTOR^® FIELD DRAIN^™ C-4 ***DISCONTINUED***
8.5 in / 216 mm
MODEL # FD C-4 appeared first on CULTEC, Inc..

CONTACTOR® EZ24 DISCONTINUED12 in / 305 mmMODEL #EZ24

govector@gmail.com — Sun, 23 Apr 2017 16:57:12 +0000

Septic Systems

The post CONTACTOR^® EZ24 ***DISCONTINUED***
12 in / 305 mm
MODEL #EZ24 appeared first on CULTEC, Inc..

CONTACTOR® 100 12.5 in / 318 mmMODEL # 100

govector@gmail.com — Wed, 26 Apr 2017 08:11:55 +0000

Septic Systems

The post CONTACTOR^® 100 12.5 in / 318 mm
MODEL # 100 appeared first on CULTEC, Inc..

CONTACTOR® 100HD 12.5 in / 318 mmMODEL # 100HD

govector@gmail.com — Wed, 26 Apr 2017 08:24:13 +0000

Septic Systems

CONTACTOR^® 100HD

12.5 in / 318 mm
MODEL # 100HD

N/A CAD – Contactor 100HD Heavy Duty Three View – Septic

The Contactor^® Chamber series consists of lower profile, lower capacity chambers used for septic installations with depth restrictions or where larger units may not approved by the local authority. The Contactor 100 is our most popular low profile septic chamber. It typically meets most 3’ wide septic code regulations.

It is available in both Standard and Heavy Duty versions.

Available models:

Heavy Duty

Contactor 100RHD Heavy Duty Stand Alone/Starter Unit
Contactor 100EHD Heavy Duty Middle/End Unit

All information on this page is for the Heavy Duty version. For information on the Contactor 100 Standard Duty see the Contactor 100 Standard Duty page.

Please note: Although CULTEC septic products may be shipped to any location, we are currently most cost-effective in the following states: CT, MA, ME, NH, NY. And VT. Call for details.

show less

Length	8.00 ft2.44 m
Installed Length	7.40 ft2.26 m
Length Adjustment per Run	0.60 ft0.18 m
Width	36 in914 mm
Height	12.50 in318 mm
Invert Height	6 in152 mm

Downloads

PDF – Contactor 100HD Heavy Duty Submittal Package- Septic

PDF – Contactor 100HD Duty Three View – Septic

Product Tags

Contactor 100HD Septic Chamber, Contactor Septic Chamber, Septic Systems

The post CONTACTOR^® 100HD 12.5 in / 318 mm
MODEL # 100HD appeared first on CULTEC, Inc..

CULTEC NO. 410 NON-WOVEN GEOTEXTILE MODEL # NWG410

govector@gmail.com — Sun, 30 Apr 2017 17:20:55 +0000

Septic Systems

CULTEC NO. 410 NON-WOVEN GEOTEXTILE

MODEL # NWG410

Septic Filter Fabric, Septic Systems

CULTEC No. 410^™ non-woven geotextile is an accessory item used with CULTEC’s plastic septic chambers.

Contact area is maximized by the use of CULTEC No. 410^™ non-woven geotextile. The CULTEC No. 410^™ non-woven geotextile works as a sponge wetting the entire surface area of the chambers in gravel-less installations and also prevents soil intrusion.

GEOTEXTILE PREVENTS SOIL INTRUSION AND PROMOTES GREATER CONTACT SURFACE AREA.

CULTEC No. 410 is must be used when installing our chambers as a gravel-less system (using sand or soil) in order to prevent intrusion onto the primary leaching area of the CULTEC septic chamber. The fabric is placed directly over the top of the chamber in gravel-less installations. Our filter fabric possesses specific properties which are required for gravel-less installations. The use of alternative filter fabrics may void the product warranty. The fabric works as a “wick” or a “sponge” and allows the effluent to creep up the fabric, utilizing the entire chamber surface for effective contact interface. Much of the available discharge opening may be blocked if no fabric is used-limiting the surface area contact with the surrounding backfill. The filter fabric prevents particulate intrusion in and out of the system during the “ebb and tide” effect that occurs within the chamber system. This is when the chamber itself fills up and then percolates into the ground and then the ground becomes saturated and water/effluent finds its way back into the chamber for storage. The fabric interface also provides a large void between the ribs and is accessible to effluent. The filter fabric interface may also be installed across the top of the trench or bed when backfilling the chambers with stone to prevent soil intrusion into the stone.

show less

Appearance	Black
Tensile Strength (ASTM-D-4632)	120 lbs.533 N
Elongation @ Break (ASTM D-4632)	50 %
Trapezoid Tear (ASTM-D-4533)	50 lbs.222 N
Puncture Strength (ASTM-D-4833)	65 lbs.289 N
Mullen Burst (ASTM-D-3786)	225 psi1551 kPa
Apparent Opening Size (ASTM-D-4751)	70 U.S. Sieve0.212 mm
Permittivity (ASTM-D-4491)	1.70 Sec. -1
CBR Puncture (ASTM D-6441)	340 lbs.1513 N
Water Flow Rate (ASTM-D-4491)	135 gal/min/sf5500 l/min/sq.mt
UV Resistance @ 500 Hours(ASTM-D-4355)	70%

Downloads

N/A PDF – Approved Septic Fabrics

Product Tags

The post CULTEC NO. 410 NON-WOVEN GEOTEXTILE MODEL # NWG410 appeared first on CULTEC, Inc..

RECHARGER® 150XLHD 18.5 in / 470 mmMODEL # 150XLHD

govector@gmail.com — Wed, 26 Apr 2017 08:36:58 +0000

Septic Systems

RECHARGER^® 150XLHD

18.5 in / 470 mm
MODEL # 150XLHD

N/A CAD – Recharger 150XLHD Three View – Septic
PDF – Recharger 150XLHD Submittal Package – Septic
PDF – Recharger 150XLHD Three View – Septic

The Recharger^® Chamber series consists of higher profile, higher capacity chambers. Fewer units are required resulting in a smaller overall footprint, where approved. The Recharger 150XLHD is a midsize septic chamber used for leachfields.

It is only available in Heavy Duty.

Available models:

Heavy Duty

Recharger 150XLRHD Heavy Duty Stand Alone/Starter Unit
Recharger 150XLEHD Heavy Duty Middle/End Unit

Please note: Although CULTEC septic products may be shipped to any location, we are currently most cost-effective in the following states: CT, MA, ME, NH, NY, and VT. Call for details.

show less

Length	11 ft3.35 m
Installed Length	10.25 ft3.12 m
Length Adjustment per Run	0.75 ft0.23 m
Width	33 in838 mm
Height	18.50 in470 mm
Invert Height	12 in305 mm

Downloads

Product Tags

Recharger 150XLHD Septic Chamber, Recharger Septic Chamber, Septic Systems

The post RECHARGER^® 150XLHD 18.5 in / 470 mm
MODEL # 150XLHD appeared first on CULTEC, Inc..

RECHARGER® 180HD 20.5 in / 521 mmMODEL # 180HD

govector@gmail.com — Wed, 26 Apr 2017 08:50:23 +0000

Septic Systems

The post RECHARGER^® 180HD 20.5 in / 521 mm
MODEL # 180HD appeared first on CULTEC, Inc..

CONTACTOR® 202 DISCONTINUED24 in / 610 mmMODEL # 202

govector@gmail.com — Tue, 16 May 2017 00:04:45 +0000

Septic Systems

CONTACTOR^® 202 DISCONTINUED

***DISCONTINUED***
24 in / 610 mm
MODEL # 202

Alternate products:
Recharger 180HD
Recharger 280HD

CAD – Contactor 202 Three View – Septic
PDF – Contactor 202 Submittal Package – Septic
PDF – Contactor 202 Three View – Septic
PDF – CULTEC State of MA Modified Certification for General Use

***DISCONTINUED***
Alternate products:
Recharger 180HD
Recharger 280HD

Length	N/A 8.33 ft2.54 m
Installed Length	N/A 7.00 ft2.13 m
Length Adjustment per Run	N/A 1.33 ft0.41 m
Width	N/A 24 in610 mm
Height	N/A 24 in610 mm
Invert Height	N/A 17 in432 mm

Downloads

Product Tags

Septic Systems

The post CONTACTOR^® 202 ***DISCONTINUED***
24 in / 610 mm
MODEL # 202 appeared first on CULTEC, Inc..

RECHARGER® 280HD 26.5 in / 673 mmMODEL # 280HD

govector@gmail.com — Wed, 26 Apr 2017 09:04:11 +0000

Septic Systems

RECHARGER^® 280HD

26.5 in / 673 mm
MODEL # 280HD