CULTEC INSPECTION PORT KITMODEL #INSPECTION PORT KIT

Stormwater Systems CULTEC INSPECTION PORT KIT, MODEL #INSPECTION PORT KIT Request Information Download PDF The 12″x6″ Inspection Port Kit is available from CULTEC for installation as clean-out assemblies. They may be used in conjunction with the CULTEC...

Separator Row

Stormwater Systems Separator Row Request Information Download PDF In order to minimize fine particles and silts from blinding the voids in the clear stone surround, a single chamber row is wrapped in non-woven geotextile and placed on a woven geotextile. This row is...

RECHARGER^® 360HD EC MODEL #360HD END CAP

Stormwater Systems RECHARGER® 360HD END CAP, MODEL #360HD EC Request Information Download PDF Specifications The Recharger 360HD End Cap is used with the Recharger 360HD Stormwater Chamber to cap the end of chamber rows. SpecificationsTechnical References Length 18...

RECHARGER^® 360HD MODEL # 360HD

Stormwater Systems RECHARGER® 360HD, MODEL #360HD Request Information Download PDF Specifications The Recharger® 360HD is a 36″ (914 mm) tall, high capacity chamber. Typically when using this model, fewer chambers are required resulting in less labor and a...

CULTEC No. 4800 Woven Geotextile MODEL #No. 4800 Woven Geotextile

Stormwater Systems CULTEC No. 4800 Woven Geotextile Request Information Download PDF Specifications CULTEC No. 4800™ Woven Geotextile is designed to provide an economical solution to prevent scouring at inlets and beneath the CULTEC internal manifold feature. It may...